How To Clean Salt Cell Pentair. This should start foaming up, don’t be alarmed as this is normal. Place a dish or a small tub under the cell to catch any solution that may spill while pouring.
Afterwards, you need to clean the salt cell with muriatic acid and water. If the cap is attached to the other end, attach the other end. This should start foaming up, don’t be alarmed as this is normal.
They Make It Great As A Sanitary Compound, As It Targets Both Minerals And Other Organic And Living Matter In The Cell.
Unscrew both sides of the salt cell to remove information technology. Fill up the salt cell with distilled white vinegar and place the cell gently inside an empty bucket. Many models display the inspect.
One Time You Have The Power Off, Take The Salt Cell Out To Inspect It More Closely.
I'm gonna try to give pentair a call too. To remove the cell, first switch off the system pump and unscrew both unions. One thing you will learn if you have a pool with a salt water system otherwise known as a salt water generator is that over time the salt cell can get calciu.
Next, Attach The Cap To One End Of The Container And Place The Cell In The Mixture.
Surfaces are particularly susceptible to corrosion and deterioration when used in and around salt water pools. Your cell should only turn on when your pump is running, and if you set your cell to turn off at least 30 minutes before your pump turns off, the water flow will cool the cell and help prevent scale. As always, it's also vital to keep your water balanced.
This Should Start Foaming Up, Don’t Be Alarmed As This Is Normal.
(“pentair”) does not represent or otherwise guarantee that the proper use of the (scg) will prevent corrosion or other deterioration of pool equipment and any surfaces used in and around your pool. Cleaning the salt cell with murium acid is one of the best ways to clean the minerals built on cell plates. Instead, it might just need a thorough cleaning.
If The Cell Cable Is Attached To The System Pipe, You May Need Release The Cable From The Pipe To Allow The Cell To Be Placed In The Bucket.
You may want to let the vinegar soak for a full 24 hours if the mineral deposits are particularly thick or stubborn. You should exist able to inspect them fairly easily to see if they need cleaning. Press the more button to cycle through each salt level, and then press the less button to choose and save the display as the new salt level.